Best Tips For Painting Your Room In Less Than 24 hours

Here are 7 of the best tips you can find about on painting your home.

1. Protection.

Protect the floor, and any furniture you can’t (or do not want to) shift, from leaks and paint stains. As plastic can be smooth under the ladder, your feet or, worse, for the floor, choose material drop cloths rather than plastic as it can get slippery.

2. Begin with a fresh surface.

Color won’t adhere too into a dirty area (think fingerprints, soot, dirt, cobwebs), therefore make use of a Swiffer-kind steamer to dry-dust the walls first. Swab down any extra-dirty parts having a soaked sponge or fabric; you will need a stool to reach up higher places.

3. Prepare the edges

Remove any outlets or light-switch covers, and protect off any areas that you don’t want to re-color — including moldings, baseboards, or window frames — with a reddish masking tape or green Frog brand which you can buy for six dollars at The frog tape when attempted on a smooth wall it was discovered that it generates a sharp point and does not enable paint to bleed through.

4. Skip one phase

Generally, artwork over a dim wall with a light color (or protecting spots) needs a coat of primer and two layers of color — and at the least six hours of drying period. That’s why we recommend Benjamin Moore a home-priming paint its cheaper than most other paints and get the job perfectly done. If you are going to light color from another light color, then you can get away with two coats of great-quality typical paint.

5. Start Artwork

Today you’re prepared for your main-event: with the angled brush or perhaps a sponge tool, color a two-inch swath across the edges of woodwork along with the ceiling, that ought to be taped off (see step 3). Then complete the fundamental unpainted room utilizing a paint dish as well as a roller (1/4-inch rest for smooth areas, 3/8-inch nap for semi-clean, or 5/8-inch sleep for rough — the incorrect tools will implement too much or inadequate color) in overlapping “W” and “M” forms will give the best clean results.

For simpler cleanup later, get one of these quick-release framework-handle roller, like Shur-Pointis that costs eight dollars. Other tools that would be worth the investments are an extension pole, a paint can opener,  and a fill spout to decrease the mess. Allow the first layer of paint to dry for at the least a couple of hours, then add the second layer again. (Between applications, make sure to tightly cover the tray and brush with plastic cover, and refrigerate.)

6. Cover it up.

Rinse your paintbrush and roller (if you don’t toss it) by running it under a tap water until all the paint has washed off and water runs clear. Put any excess paint left over in the tray back in the can, seal the can firmly by setting a paper towel over the top and make sure to close the lid tight on the can. Rinse the holder. When the combis bristles are completely dried, ease the brush back to its initial paper wrapper to preserve the bristles or try this DIY fix: Wrap  the bristles with heavy duty paper!

7. Keep no track.

Find yourself a wet rag that will help clean out any fresh spots. Scrape off dried drips with plastic spatula or a credit card. Last thing to do – remove the masking tape carefully making sure you pull the tap off at an angle, slowly to avoid in cracks or tear offs in the new paint on the edges.

If you want to learn more about painting your home, why not ask the pros at Phoenix House Painting. We definitely recommend them as our number one painting service in Phoenix. 

Home Painter